4-24. HEAT SHIELD REPAIR.

b. INSTALLATION - TM-9-2350-287-20-1_622

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
599

TM 9-2350-287-20-1 4-24. HEAT SHIELD REPAIR. This Task Covers: a. Removal b. Disassembly c. Cleaning and Inspection d. Assembly e. Installation Initial Setup: Tools/Test Equipment: Pad, insulation (Item 211, Appendix H) General mechanic's tool kit Self-locking nut (23) (Item 317, Appendix H (Item 24, Appendix I) Self-locking nut (3) (Item 320, Appendix H) Self-locking nut (2) (Item 324, Appendix H) Materials/Parts: Equipment Conditions: Adhesive, rubber (Item 5, Appendix D) Vehicle parked on level ground (refer to Dry-cleaning solvent (Item 28, Appendix D) TM 9-2350-287-10). Sealing compound (Item 58, Appendix D) Powerpack, removed (para 3-2). Lockwasher (3) (Item 175, Appendix H) Exhaust duct removed (para 5-2). a. REMOVAL 1. Remove two screws (4), nuts (6), and brackets (5) from fuel tank heat shield (1). 2. Remove 10 screws (3) and washers (2) from heat shield (1). 3. Remove two screws (16) and washers (15) and bracket (12) from vehicle. 4. Remove screw (9) and washer (8) from bracket (7). 5. Remove heat shield (1) from vehicle. 6. Remove screw (10), washer (11), and self-locking nut (14) to separate bracket (12) from section support (13). Discard self-locking nut. Change 1 4-65

Privacy Statement
Press Release
Contact