TM 8-2350-287-20-1
4-23. LOWER FUEL TANK LEVEL TRANSMlTTER REPLACEMENT (continued).
7.
8.
9,
b.
1.
2.
3.
4.
5.
6,
7.
8.
Disconnect electrical connector (15) from transmitter (21).
Remove five screws (16) and washers (17) and ground lead (18) from transmitter (21).
Remove transmitter (21 ) and gasket (20) from lower fuel tank (1 9). Discard gasket.
INSTALLATION
Apply sealing compound to new gasket (20), and install new gasket (20) and transmitter (21) in Iower fuel tank
(19).
Install ground lead (18) on transmitter (21) with five screws (16) and washers (17).
Connect electrical connector (15) to transmitter (21).
Position tube (14) into place and tighten nut (13).
Install seal (12), access cover (9), and bar (1) on heat shield (8).
Install two nuts (10) and washers (11) on access cover (9).
Install nut (6), washer (7), and six new self-locking nuts (2) on bar (1).
Install stiffener (5) on access cover (9) and heat shield (8) with screw (14) and washer (3).
FOLLOW-ON TASKS:
• Install exhaust deck (para 15-8).
• Refill fuel tanks (refer to TM 9-2350-287-1 0).
4-64
