POWERPACK REPLACEMENT (continued). - TM-9-2350-287-20-1

POWERPACK REPLACEMENT (continued). - TM-9-2350-287-20-1_499

POWERPACK REPLACEMENT (continued). - TM-9-2350-287-20-1_501

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
476

TM 9-2350-287-20-1 3-2. POWERPACK REPLACEMENT (continued). 6. Remove quick-release pin (13) and fuel shutoff cable (14) from fuel shutoff control (12). Lift up on pulley (15), and remove fuel shutoff cable (14) from pulley (15). Lay fuel shutoff cable (14) out of the way. 7. Disconnect fuel-line quick disconnect (17) from primary fuel filter (16). 8. Remove screw (18), two lockwashers (19), and ground lead (20) from hull. Discard lockwashers. CAUTION After disconnecting, make sure steering and shift control rods are in driver's compartment wall to prevent damage when removing and installing powerpack. 9. Remove quick-release pin (22) and throttle governor control connecting linkage (25) from throttle linkage bracket (26). 10. Remove cotter pin (24), straight pin (23), and throttle valve control rod (21) from throttle linkage bracket (26). Discard cotter pin. 11. Remove cotter pin (27), washer (29), straight pin (28), and accelerator linkage (33) from throttle linkage bracket (26). Discard cotter pin. 12. Remove three screws (32), lockwashers (31), and washers (30) and throttle linkage bracket (26) from hull. Discard lockwashers. Change 1 3-4

Privacy Statement
Press Release
Contact