TM 9-2350-287-20-1
2-22. SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION
ENGINES (STE/lCE) (continued).
b. STE/lCE TROUBLESHOOTING - (continued).
(12) GENERATOR OUTPUT VOLTAGE - TEST 82.
Tools/Test Equipment:
• General mechanic’s tool kit (Item 24, Appendix I)
• STE/lCE test set (Item 65, Appendix I)
A. 1. Connect DCA cable W1 connector P1 to
VTM connector J1.
2. Connect DCA cable W1 to harness
12329996 connector at DCA receptacle in
driver’s compartment.
3. Push power switch on VTM to ON position.
4. Do confidence test 66/99 (para 2-22.a(1)).
5. Dial 60 into TEST SELECT.
6. Press and release TEST button. Message
“VEH” should be displayed on the VTM.
7. Enter the vehicle ID number 11.
8. Start engine (refer to TM 9-2350-287-10).
9. Increase engine speed between 1000 and
1200 RPM.
10. Turn on headlights and electrical accesso-
ries (refer to TM 9-2350-287-10).
11. Enter 01 into TEST SELECT, then press
and release TEST button.
12. When “CON” shows on VTM, enter 82 into
TEST SELECT, then press and release TEST
button.
13. Record test results.
Is reading on VTM greater than 26.5 vdc?
2-423
