TM 9-2350-287-20-1I2-19. TROUBLESHOOTING CHART (continued).u. AUXILIARY POWER UNIT (continued).(1) ENGINE CRANKS BUT FAILS TO START(continued).CONTINUED FROM FF. 3. With the aid of an assistant turn MASTERswitch ON (refer to TM 9-2350-287-10).4. Turn FUEL SHUT-OFF switch ON (refer toTM 9-2350-287-10).5. Check for 24 ± 3 vdc.6. Turn MASTER switch and FUEL SHUT-OFF switch OFF (refer to TM 9-2350-287-10).Is voltage indicated?IRepair lead 421 or replace harness12329640 (para 18-21). Verify problem issolved.G. 1. Reconnect harness 12329640 connectorto APU wall.2. Remove APU control box (para 7-22).3. Disconnect wire harness 12330248 plugfrom APU control box.4. Place red probe of multirneter in pin N ofplug and ground black probe.5. With the aid of an assistant turn MASTERswitch ON (refer to TM 9-2350-287-10).6. Check for 24 ± 3 vdc.7. Turn MASTER switch OFF (refer to TM 9-2350-287-10).Is voltage indicated?Continued on next page2-295
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business