TM 92350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
g. GAGES (continued).
(3) TRANSMISSION OIL PRESSURE GAGE FAILS
TO OPERATE. All other gages operate properly
(continued).
B. 1. Reconnect wire 27 to gage.
2. Disconnect wire 321 from transmission oil
pressure gage.
3. Insert grounded jumper wire into gage.
4. Turn MASTER switch ON (refer to TM 9-
2350-287-1 O).
5. Observe transmission oil pressure gage.
6. Turn MASTER switch OFF (refer to TM 9-
2350-287-10).
Does gage indicate maximum pressure?
Replace transmission oil pressure
gage (para 7-6). Verify problem is
solved.
C. 1. Reconnect wire 321 to transmission oil pres-
sure gage.
2. Open engine intake grille (refer to TM 9-
2350-287-10).
3. Remove engine compartment access cover
(para 15-16).
4. Remove wire 321 from transmission oil pres-
sure transmitter.
5. Insert a grounded jumper wire into wire 321.
6. Turn MASTER switch ON (refer to TM 9-
2350-287-10).
Continued on next page
2-108
