2. SPEEDOMETER ADAPTER HOUSING

TM-9-2350-287-10 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
373

TM 9-2350-287-10 -KEY- Expected Temperatures Lubricants Above 15°F +40°F to -10°F +40°F to -65°F Intervals (Above -9°C) (+4C to -23°C) (+4°C to -54°C) OE/HDO (MIL-L- Intervals are as 2104D) follows: Lubricating Oil, S - Semiannually Internal Combustion Intervals are Engine, Tactical Service based on normal hours of operation and moderate Final Drive Breather OE/HDO 15W 40 OE/HDO 15W 40 OEA operating conditions. GAA (MIL-G-10924) GREASE, Automotive and Artillery All Temperatures Final Drive Universal Joints Speedometer Adapter Housing NOTES: 2. SPEEDOMETER ADAPTER HOUSING. Use a grease gun to inject GAA at fitting (2) on speedometer adapter housing. 3. FINAL DRIVE UNIVERSAL JOINTS. Lubricate two fittings (4) on each side of vehicle with GAA.. Rotate universal joints to reach fittings. 4..FINAL DRIVE BREATHERS. Remove both breathers (3). Clean with drycleaning solvent (Item 13, Appendix D). Dry, dip in oil, and install (see key for required type). E-5

Privacy Statement
Press Release
Contact