TM 9-2350-287-10
OPERATING THE CONVEYOR (continued)
17. With assistant supporting conveyor (7), secure
conveyor (7) with stowage strap (21). Tighten
strap (19).
18. Install two quick-release pins (11) in two
conveyor support struts (10), and tighten two
friction handles (12).
19. Disconnect two slings (8) from conveyor (7)
and install in hook (21) on hydraulic actuator
base (20).
20. Double-check to make sure conveyor safety
switch (22) is turned to OFF.
WARNING
To avoid damage to conveyor
components and serious
Injury to personnel during
upper rear door operation,
secure conveyor with strap
after placing it on bracket.
21. Close upper rear door (p. 2-140).
22. Close upper rear door small doors (p. 2-142).
23. Shut down primary hydraulic pump (p. 2-132).
24. Close lower rear door (p. 2-137).
2-167
