TM 9-2350-287-10
STARTING MAIN ENGINE (continued)
2. Adjust drivers seat as necessary.
Adjusting up and down. Hold seat down and pull up on adjusting lever
(7). With lever raised, lift or press seat to obtain correct height.
Release adjusting lever to lock in position.
Adjusting forward and backward.
Pull up on adjusting tab (8) and move seat forward or backward.
Release adjusting tab to lock in position.
Backrest positioning. Press pawl (9) and rotate backrest up and back.
When backrest is positioned vertically, reposition pawl to lock backrest.
Adjusting backrest height. Remove adjusting pin (10) and lower or raise
backrest. When desired height is obtained, install pin in adjusting holes.
3. Adjust steering wheel by pressing sleeve bearing (11) forward and rotating
steering wheel up or down. Raise wheel if driving with hatch open; lower wheel
when driving with hatch closed. When correct adjustment is obtained, release
sleeve bearing to lock position.
4. If driving in raised position, clip portable instrument panel (12) into bracket
(on top of hull just left of driver's hatch).
2-83