TM 9-2350-277-34
REPAIR EXTERNAL COMMUNICATION BOX A11 (M1068A3 ONLY) — Continued
0100 00
NOTE
See wiring diagram page 0100 00–4 for assembly/disassembly of wires to connectors.
Tag leads/cables before removing/disconnecting. Replace pads only if damaged.
NOTE
If cable W118 is being replaced, remove connector (6) before discarding.
6.
Remove twelve screws (1), lockwashers (2), cable W117 (3), and cable W118 (4) from communication box (5). Discard
lockwashers.
7.
Remove fourteen screws (7), lockwashers (8), and faceplate (9) from communication box (5). Discard lockwashers.
8.
Remove two screws (10), locknuts (11), and four caps (12) from faceplate (9). Discard locknuts.
9.
Remove two screws (13), locknuts (14), and caps (15) from faceplate (9). Discard locknuts.
10. Remove four cables (16) from faceplate (9).
11. Loosen sixteen binding posts (17) and remove cable W115 (18).
12. Remove four connectors (19) and four cables (20) from faceplate (9).
13. Remove two nuts (21), four bushings (22), cable W101 (23), and cable W102 (24) from faceplate (9).
0100 00-3
