INSTALLATION - TM-9-2350-277-34

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
444

TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3, M901A3, AND M1059A3 ONLY) — Continued 0075 00 36. Remove and discard cap (12) from personnel heater fuel pump (13). 37. Install fuel hose (14) on personnel heater fuel pump tee (15). 38. Install fuel hose (16) on tee (15). 39. Install coolant heater fuel pump lead (17) and clamp (18) on weldnut (19). Secure with screw (20), washer (21), and two lockwashers (22). 40. Connect circuit 402A lead (23) to coolant heater fuel pump lead (17). 41. Apply sealing compound to external tapered threads of elbow (24). Do not apply sealing compound beyond small end of tapered threads. 42. Install elbow (24) and jam nut (25) on bulkhead. 43. Route supply hose (26) through hull openings. 44. Install seven clamps (27) on supply hose (26) with seven screws (28). 45. Connect supply hose (26) to elbow (24). 0075 00-9

Privacy Statement
Press Release
Contact