TM 9-2350-277-34
INSTALL ENGINE COOLANT HEATER KIT (M113A3, M901A3, AND M1059A3 ONLY) —
Continued
0075 00
64. Install one clamp (11) on each hose (8) and (9) and secure to seat bracket (12) with two screws (13), washers (14), and
nuts (15).
NOTE
Do not kink hoses.
65. Install clamp (16) on hoses (8) and (9) and secure to weldnut (17) with screw (18) and washer (19).
66. Install batteries and retainers (see your -20).
67. Install one clamp (20) each on second coolant pump hose (21) and second engine hose (22). Connect hoses to elbows (5)
under driver’s floor plate. Tighten clamps.
0075 00-14
