TM 9-2350-277-34
REPAIR COMMANDERS CUPOLA (M113A3, M1059A3, M1064A3, AND M58 ONLY)
Continued
0051 00
22. Install tube (3) on chain (2).
23. Install hook (1) in chain (2) and cupola bracket. Squeeze both ends of hook to secure.
24. Place new seal (12) over retaining groove in cover (6). Press seal into place. Trim end of seal if needed.
25. Install screw (11) in cover (6). Secure with new locknut (10).
26. Align cover (6) with cupola brackets. Install two fiber washers (9) and shield (8).
27. Apply light coat of grease to each spring (7). Install 12 springs on shield (8).
0051 00-16