TM 9-2350-277-34
REPLACE FRONT MAIN WIRING HARNESS — Continued
0030 00
NOTE
Two lead bushings are installed the same way Steps 5 - 6.
5.
Install bushing (28) into left bushing hole on front upper nose plate of hull. Secure with washer (26), new lockwasher
(25), and nut (24) (from inside of hull), two washers (26) (27), new lockwasher (25), and nut (24) (from outside of hull).
6.
Route circuit 17, 18, and 20 leads (6) out through bushing. Install rubber bushing (7), retainer pack (8), spring washer (9)
on bushing. Secure with coupling nut (10).
7.
Install blackout headlight (2) and secure with washer (18), lockwasher (17), and new locknut (16).
0030 00-22
