REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER Continued

REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER Continued - TM-9-2350-277-34_164

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
134

TM 9-2350-277-34 REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER — Continued 0016 00 WARNING Engine could start and injure you. Stay clear of possible moving parts. NOTE Ensure FUEL SHUTOFF handle is in OFF position. Engine could start during performance of Step 6. 5. Have helper use 1 1/2 socket and 3/4 inch drive breaker bar on cam nut (1) to prevent engine from turning over in Step 6. 6. Loosen retainer screw (5) four complete turns. Use 3/4 inch drive breaker bar. Install puller and three 1/4-28 UNF screws. Install three screws and washers into rear hub (6). Break loose front cone (7) from seated position. Remove puller and three screws. Unscrew retainer screw (5), remove washer (8), and front cone (7). 0016 00-3

Privacy Statement
Press Release
Contact