REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER

FOLLOW-THROUGH STEPS - TM-9-2350-277-34_161

REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER Continued - TM-9-2350-277-34_164

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
132

TM 9-2350-277-34 REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER 0016 00 THIS WORK PACKAGE COVERS: Removal (page 0016 00-1). Installation (page 0016 00-4). INITIAL SETUP: Maintenance Level Direct Support Tools and Special Tools General Mechanic’s Tool Kit (WP 0120 00, Item 62) Retaining Ring Pliers (WP 0120 00, Item 39) Puller Set (WP 0120 00, Item 45) Screws 1/4-28 UNF (3) (WP 0120 00, Item 49) Washer (3) (WP 0120 00, Item 67) Torque Wrench (WP 0120 00, Item 76) Socket Wrench Set (WP 0120 00, Item 78) Materials/Parts Grease (WP 0122 00, Item 20) Sealing compound (WP 0122 00, Item 27) Cotter pin Preformed packing (2) Preformed packing (2) Personnel Required Track Vehicle Repairer 63H10 Helper Equipment Condition Variable speed drive assembly removed (see your -20) REMOVAL NOTE Front hub assembly may come out when variable speed drive assembly is removed from engine or it may remain in engine. Go to Step 2 if front hub comes out with variable speed drive assembly. 1. Remove front hub (1) from sleeve (2) in engine. 2. Remove plug (3) from sleeve (2). 0016 00-1

Privacy Statement
Press Release
Contact