INSTALLATION - TM-9-2350-277-20-6

INSTALL/REMOVE CHEMICAL AGENT AUTOMATIC ALARM KIT (M113A3 ONLY)

TM-9-2350-277-20-6 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
379

TM 9-2350-277-20-6 REMOVE/INSTALL NBC CABLE ASSEMBLY (M58 ONLY) — Continued 0917 00 INSTALLATION NOTE Apply corrosion preventive compound to all threaded fasteners. 1. Install cable assembly (1) on air purifier (2). 2. Loosen screw (3) on right angle connector (4) on cable assembly (1). Slide slotted end of ground wire (5) under screw (3). Tighten screw. 3. Route cable assembly (1) through clamps (6). 4. Install cable assembly (1) on switch (7). 5. Align clamps (6) with weld nuts (8) on bulkhead (9). Secure with new lockwashers (10) and screws (11). FOLLOW-THROUGH STEPS 1. Start engine (see your -10). 2. Raise and lock ramp (see your -10). 3. Stop engine (see your -10). END OF TASK 0917 00-3/4 blank

Privacy Statement
Press Release
Contact