TM 9-2350-277-20-6
REPLACE NBC ORIFICE CONNECTOR ASSEMBLY, MOUNTING BRACKET, AND
SWITCH (M58 ONLY) — Continued
0916 00
INSTALLATION
NOTE
Apply corrosion preventive compound to all threaded fasteners.
Do Steps 1 - 3 if installing driver’s support and angle.
1.
Align holes in angle (1) with holes in bracket (2). Secure angle (1) to bracket (2) with two screws (3), washers (4), and
new lockwashers (5).
2.
Install switch (6) on angle (1) with two screws (7) and new lockwashers (8).
3.
Align holes in support (9) with holes in angle (1). Secure support (9) on angle (1) with circuit breaker (10), two screws
(11), washers (12), and new lockwashers (13).
0916 00-5
