INSTALLATION (cont) - TM-9-2350-277-20-6

INSTALLATION (cont) - TM-9-2350-277-20-6_458

INSTALLATION (cont) - TM-9-2350-277-20-6_460

TM-9-2350-277-20-6 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
362

TM 9-2350-277-20-6 REPLACE/REPAIR VFM POWER DISTRIBUTION PANEL ASSEMBLY (M981A3 ONLY) — Continued 0913 00 NOTE Lubricate rubber-to-rubber mating surfaces with silicone compound. 14. Connect lead (10) to terminal 1 of connector J3 (11). 15. Connect lead (12) to terminal 1 of circuit breaker CB4 (13). 16. Connect lead (14) to terminal 1 of connector J2 (15). 17. Connect lead (16) to terminal 1 of connector J1 (17). 18. Connect lead (18) to terminal 2 of circuit breaker CB3 (19). 19. Connect lead (20) to terminal 1 of circuit breaker CB2 (21). 20. Connect lead (22) to terminal 1 of switch S1 (23). 21. Route all leads through clamp (1). Align clamp (1) on VFM power distribution panel (2). Secure with washer (3), screw (4), and nut (5). 0913 00-15

Privacy Statement
Press Release
Contact