TM 9-2350-277-20-6REPLACE LAN A OR B CABLE (W103/W104) (M1068A3 ONLY) — Continued 0854 00INSTALLATION1. Install cable W103 or W104 in carrier.2. Connect cable W103 plug P1 (1) to data panel assembly A12 (2) jack 2 (3) or W104 plug P1 (4) to data panel assemblyA12 (2) jack J5 (5).3. Attach cable to carrier with two clamps (6), washers (7), two screws (8), and new locknuts (9).4. Secure excess slack in cable with new strap (10).5. Attach cable to carrier hull above engine access panel with four clamps (11) and screws (12).6. Install two clamps (13) and screws (12) on weldnut.7. Attach cable to left side of carrier hull with four clamps (14) and screws (15).8. Connect cable W103 plug P2 (16) to roadside data box A13 (17) jack J5 (18) or W104 plug P2 (19) to roadside data boxA13 (17) jack J2 (20).9. Attach excess cable slack to carrier hull above access panel with eight new straps (21).FOLLOW-THROUGH STEPS1. Connect battery ground lead (WP 0338 00).2. Turn MASTER SWITCH ON (see your -10). Check that electrical system works properly.3. Turn MASTER SWITCH OFF (see your -10).END OF TASK0854 00-3/4 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business