TM 9-2350-277-20-6
REPLACE CABLE W124 (M1068A3 ONLY) — Continued
0855 00
7.
Remove screw (1) and clamp (2) from weldnut (3) near end of Patch Panel Box A10 (4).
8.
Remove screw (5), clamp (6), and clamp (7) from weldnut (8) below Patch Panel Box A10 (4). Remove clamp (6) from
cables (9).
9.
Disconnect cable W124 plug P109 (10) from Patch Panel Box A10 jack J140 (11).
INSTALLATION
1.
Connect cable W124 plug P109 (10) to Patch Panel Box A10 jack J140 (11).
2.
Install clamp (6) on cables (9).
3.
Secure clamp (7) and clamp (6) to weldnut (8) below Patch Panel Box A10 (4) with screw (5).
4.
Install clamp (2) on cables (9) and secure to weldnut (3) near end of Patch Panel Box A10 (4) with screw (1).
0855 00-3
