INSTALLATION - TM-9-2350-277-20-6

TM-9-2350-277-20-6 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
113

TM 9-2350-277-20-6 REPLACE CASCADE REMOTE HARNESS (M1068A3 ONLY) — Continued 0847 00 INSTALLATION 1. Install RP1 harness (1), four screws (2), and new locknuts (3) on faceplate (4). Route RP1 harness leads down through power enclosure (5) and behind inverter housing A2 to front face of inverters. Avoid interfering with other components in power enclosure. 2. Lift faceplate (4) in place and install 10 new lockwashers (6) and screws (7). 3. Connect RP1 harness (1) to front of inverters (8). Tighten captive screws on connectors. 4. Install face plate (9) on front of inverter housing A2 (10) with 10 new lockwashers (11) and screws (12). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0338 00). END OF TASK 0847 00-3/4 blank

Privacy Statement
Press Release
Contact