TM 9-2350-277-20-6
REPLACE AC LIGHT CABLE (W11) (M1068A3 ONLY) — Continued
0845 00
INSTALLATION
1.
Install cable W11 in carrier.
2.
Connect cable W11 plug P2 to AC light plug P1 (1).
3.
Install two loop clamps (2) and secure to hull with two screws.
4.
Secure cable with five new straps (3).
5.
Install five loop clamps (4) and secure to hull with five screws.
6.
Install three loop clamps (5) and secure to hull with three screws.
7.
Connect cable W11 plug P17 (6) to power control box A1 jack J37 (7).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Turn MASTER SWITCH ON (see your -10). Check that electrical system works properly.
3.
Turn MASTER SWITCH OFF (see your -10).
END OF TASK
0845 00-3/4 blank
