TM 9-2350-277-20-6
REPLACE HARNESS W32 (M1068A3 ONLY) Continued
0848 00
INSTALLATION
1.
Route branch of W32 harness (1) along fuel line (2) to data panel assembly A13 (3). Secure W32 harness with five new
straps (4).
2.
Install two clamps (5) on W32 harness (1) and secure to power control enclosure A1 (6) with two screws (7) and
washers (8).
3.
Install clamp (9) on W32 harness (1) and secure clamps (9) and (10) to weldnut (11) below patch panel box A10 (12)
with screw (13).
0848 00-4