INSTALLATION - TM-9-2350-277-20-6

REPLACE POWER ENTRY BOX ASSEMBLY A4 (M1068A3 ONLY)

TM-9-2350-277-20-6 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
69

TM 9-2350-277-20-6 REPLACE/REPAIR POWER DISTRIBUTION BOX A3 (M1068A3 ONLY) — Continued 0831 00 INSTALLATION 1. Install two circuit 1 leads (1) through back of power distribution box (2). Secure to terminal (3) with washer (4) and screw (5). Have helper assist. 2. Install two circuits 2 leads (6) through back of power distribution box (2). Secure to terminal (7) with washer (4) and screw (5). Have helper assist. 3. Install circuit 3 lead (8) through back of power distribution box (2). Secure to terminal (9) with washer (4) and screw (5). Have helper assist. 4. Install lid (10) on power distribution box (2). Secure with 12 new lockwashers (11) and screws (12). 5. Install power distribution box (2) on bulkhead. Secure with two washers (13) and screws (14). 6. Connect cable (15) to connector (16) on power distribution box (2). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0338 00). END OF TASK 0831 00-4

Privacy Statement
Press Release
Contact