TM 9-2350-277-20-5
REPLACE M8A3 NBC CABLES, SWITCH ASSEMBLY, AND BRACKETS (M577A3 ONLY)
— Continued
0801 00
INSTALLATION
1.
Install lead (10) and circuit lead 10 (9) to connector (8).
2.
Install cable (1) in connector (8).
3.
Route cable (1) along adjacent wiring harness. Secure with five new tie straps (7).
4.
Install three clamps (6) on cable (1). Secure clamps to driver’s rear bulkhead with three screws (4) and new
lockwashers (5).
5.
If damaged, install new grommet (2) on cable (1). Route cable through frame (3) and insert grommet.
0801 00-4
