TM 9-2350-277-20-5
REPLACE FRONT BILGE PUMP PIPES — Continued
0631 00
2.
Loosen four clamps (4). Remove lower pipe (5) from upper pipe (6) and bilge pump (7). Remove clamp (3), clamps (4),
and two hoses (8) from pipe (5).
3.
Loosen two clamps (9). Slide pipe (6) from discharge outlet and remove pipe from driver’s compartment. Remove
clamp (3), clamps (9), and hose (10) from pipe.
4.
Remove grommet (11) from driver’s compartment bulkhead. Discard grommet.
5.
Remove four locknuts (12), washers (13), two U-bolts (14), sight glass (15), and gasket (16) from pipe (6). Discard
gasket and locknuts.
0631 00-2
