INSTALLATION - TM-9-2350-277-20-5

REPLACE FLAME DETECTOR SWITCH - TM-9-2350-277-20-5_447

REPLACE COOLANT HEATER WIRING HARNESS - TM-9-2350-277-20-5_449

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
364

TM 9-2350-277-20-5 REPLACE FLAME DETECTOR SWITCH — Continued 0734 00 INSTALLATION 1. Install flame detector switch (6) in heater (3). Secure with nut (7) on switch. NOTE Check tags on leads to make sure of proper connections. 2. Place five leads (5) on switch (6). Secure with five screws (4). 3. Place guard (2) on heater (3). Secure with four screws (1). FOLLOW-THROUGH STEPS 1. Install coolant heater and pump unit (WP 0728 00). 2. Start heater (see your -10). Check that flame detector switch works right. Turn heater off. END OF TASK 0734 00-2

Privacy Statement
Press Release
Contact