REPLACE BLACKOUT CURTAIN AND FRAME (M577A3 AND M1068A3 ONLY)

REPLACE BLACKOUT CURTAIN AND FRAME (M577A3 AND M1068A3 ONLY) - TM-9-2350-277-20-5_43

REPLACE BLACKOUT CURTAIN AND FRAME (M577A3 AND M1068A3 ONLY) - TM-9-2350-277-20-5_45

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
8

TM 9-2350-277-20-5 REPLACE BLACKOUT CURTAIN AND FRAME (M577A3 AND M1068A3 ONLY) — Continued 0629 00 8. If needed, remove two eyelets (20) and washers (21) from curtain (6). INSTALLATION 1. If removed, place two eyelets (1) on curtain (2). Secure with two washers (3). 2. If removed, place four buttons (4) on curtain (2). Secure with four sockets (5). 3. Install two studs (6) on lower frame and traverse beam in driver’s compartment. 4. If removed, install two fasteners (7) on rear bulkhead in driver’s compartment. 5. Install new grommet (8), screw (9), two washers (10), and new locknut (11) on frame (12). 6. Align frame (12) with bulkhead and sponson. Secure with six screws (13), twelve washers (14), and six new locknuts (15). 7. Install rod (16) in curtain (2). 0629 00-2

Privacy Statement
Press Release
Contact