TM 9-2350-277-20-5
REPLACE HEATER AIR INTAKE AND EXHAUST PIPES(M1064A3 ONLY) — Continued
0683 00
INSTALLATION
1.
Install exhaust elbow (7), intake elbow (2), and two new gaskets (9) on carrier top deck. Secure with six screws (8).
2.
Install exhaust pipe (5) on exhaust elbow (7). Secure with U-bolt (4), clamp (6), and two nuts (3).
3.
Install intake pipe (1) on intake elbow (2).
FOLLOW-THROUGH STEPS
1.
Install heater assembly (WP 0704 00).
2.
Connect battery ground strap (WP 0337 00).
3.
Start heater. Check for intake and exhaust leaks. Turn heater off (see your -10).
4.
Start engine (see your -10).
5.
Raise and lock ramp (see your -10).
6.
Stop engine (see your -10).
END OF TASK
0683 00-3/4 blank
