TM 9-2350-277-20-5
REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (ALL EXCEPT M1064A3)
Continued
0682 00
FOLLOW-THROUGH STEPS
1.
Install heater assembly (WP 0703 00).
2.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
3.
Close spall liners (M113A3 only) (see your -10).
4.
Start heater. Check for intake and exhaust leaks. Turn heater off (see your -10).
5.
Install power plant rear access panel (WP 0439 00).
END OF TASK
0682 00-4