TM 9-2350-277-20-4
REPLACE/REPAIR ELECTRICAL EQUIPMENT RACK ASSEMBLY (M981A3 ONLY) —
Continued
0597 00
ASSEMBLY
1.
Install drawer/lid assembly (16), four screws (13), eight washers (15) and new locknuts (14) on angle brackets (5), (6),
(7), and (8). TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
2.
Install top shelf (12), four screws (9), eight washers (11), and new locknuts (10) in angle brackets (5), (6), (7), and (8).
TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
3.
Install middle shelf (4), four screws (1), eight washers (3), and new locknuts (2) in angle brackets (5), (6), (7), and (8).
Tighten locknuts to 40-60 lb-in (5-6 N.m) torque.
4.
Install bottom shelf (1), five screws (2), ten washers (3), and new locknuts (4) on angle brackets (5), (6), (7), and (8).
TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
5.
Install screw (9), two washers (10), and new locknut (11) in angle bracket (8) and bottom shelf (1). TIGHTEN
LOCKNUT TO 40-50 LB-IN (5-6 N m) TORQUE.
6.
Install top shelf (12), six screws (13), twelve washers (14), and new locknuts (15) on angle brackets (5), (6), (7), and (8).
TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
0597 00-6
