TM 9-2350-277-20-4
REPLACE/REPAIR ELECTRICAL EQUIPMENT RACK ASSEMBLY (M981A3 ONLY) —
Continued
0597 00
8.
Install bottom shelf (20), three screws (21), six washers (22), and new locknuts (23) on angle brackets (24), (25), and
(26). TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
9.
Install screw (27), two washers (28), and new locknut (29) in angle bracket (30) secure to bottom shelf (20). TIGHTEN
LOCKNUT TO 40-50 LB-IN (5-6 N m) TORQUE.
10. Install top shelf (31), four screws (32), eight washers (33), and new locknuts (34) on angle brackets (24), (25), (26), and
(30). TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
11. Install support bracket (35), two screws (36), four washers (37), and new locknuts (38) on angle bracket (30).
12. Install mounting plate (39), two screws (40), washers (41), and new locknuts (42) on angle brackets (25) and (30).
TIGHTEN LOCKNUTS TO 40-50 LB-IN (5-6 N m) TORQUE.
13. Install two screws (43), washers (44), and new locknuts (45) in mounting plate (39) and angle brackets (25) and (30).
TIGHTEN LOCKNUTS TO 80-90 LB-IN (9-10 N m) TORQUE.
0597 00-8
