TM 9-2350-277-20-4
REPLACE/REPAIR ELECTRICAL EQUIPMENT RACK ASSEMBLY (M981A3 ONLY) —
Continued
0597 00
2.
Have helper hold electrical equipment rack (5) in place. Remove four screws (6), eight washers (7), and four locknuts (8)
from ceiling mounted brackets (9). Remove rack from carrier. Discard locknuts.
DISASSEMBLY
1.
Remove two screws (1), locknuts (2), and four washers (3) from mounting plate (4) and angle brackets (5)(6).
Discard locknuts.
2.
Remove two screws (7), locknuts (8), washers (9), and mounting plate (4) from angle brackets (5)(6). Discard locknuts.
3.
Remove two screws (10), locknuts (11), four washers (12), and support bracket (13) from angle bracket (6).
Discard locknuts.
4.
Remove four screws (14), locknuts (15), eight washers (16), and top shelf (17) from angle brackets (18), (5), (6), and
(19). Discard locknuts.
5.
Remove screw (20), locknut (21), and two washers (22) from angle bracket (6) and bottom shelf (23). Discard locknut.
0597 00-2
