TM 9-2350-277-20-4
REPLACE DRIVER’S HATCH INTERIOR LOCK AND LATCH — Continued
0534 00
6.
Loosen nut (13). Remove lug (14) from bulkhead. Remove nut from lug.
INSTALLATION
1.
Install nut (1) on lug (2). Install lug in bulkhead. Do not tighten nut.
2.
Install nut (3) and eyebolt (4) in clevis (5). Do not tighten nut.
3.
Align latch (6), spring (7), and two washers (8) with clevis (5). Secure with headed pin (9) and new cotter pin (10).
0534 00-2
