TM 9-2350-277-20-4
REPLACE DRIVER’S HATCH INTERIOR LOCK AND LATCH — Continued
0534 00
4.
Align eyebolt (4), spring (11), and two washers (12) with driver’s hatch bracket. Secure with headed pin (13) and new
cotter pin (14).
ADJUSTMENT
1.
Perform Step 2 and Step 3 to adjust lock and latch.
2.
Turn clevis (5) on eyebolt (4) until hatch closes tightly on hull in the latched position with maximum clearance of 3/32
inch (2 mm). Tighten nut (3).
3.
Turn lug (2) until latch (6) is in line with clevis (5) or 1/4 inch (6 mm) maximum above clevis in the latched position.
Tighten nut (1) on lug.
0534 00-3
