ADJUSTMENT - TM-9-2350-277-20-4

ADJUSTMENT (cont) - TM-9-2350-277-20-4_455

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
367

TM 9-2350-277-20-4 ADJUST RAMP LOCK (M1064A3 ONLY) — Continued 0523 00 NOTE Install the same number of flat washers (8) on each side of all four supports (9). 5. To adjust catch (6) and striker (7), remove eight screws (10) and key washers (11) from four supports (9). Discard key washers. Install new flat washers (8) to shim between supports (9) and hull top plate. 6. Install eight new key washers (1). Tighten eight screws (2) and bend washer keys to secure screws. If shimmed right, catch (3) on lever (4) will engage firmly with striker (5). 7. For carriers with flat shaped rod (6), place link (7) in clevis (8). Secure with headed pin (9) and a new cotter pin (10). 8. Start engine (see your -10). 9. Raise and lock ramp (see your -10). 10. Stop engine (see your -10). 0523 00-2

Privacy Statement
Press Release
Contact