TM 9-2350-277-20-4REPLACE HOPPER HATCH (M58 ONLY) — Continued 0484 001. Release hopper hatch lock (1). Raise hopper hatch cover (2) 3/4 up to unsprung position. Have helper support hatch.CAUTIONDamage to equipment may occur if hopper hatch is not raised to 3/4 open position whenremoving retainer.2. Remove two locknuts (3), screws (4), and retainer (5) from hinge brackets (6). Discard locknuts.3. Have helper support hopper hatch cover (2). Remove 17 springs (7), shield (8), and two fiber washers (9) from hopperhatch cover and hinge brackets (6).4. Remove hopper hatch cover (2) from carrier top plate.5. Remove four screws (10), washers (11), two brackets (6), and shims (12) from carrier top plate.6. Remove seal (13) from hopper hatch cover (2). Discard seal.7. Using cable assembly (14), lift screen (15) from hopper opening.8. Remove two screws (16), washers (17), and cable assembly (14) from screen (15).0484 00-2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business