TM 9-2350-277-20-4
REPAIR TRIM VANE (ALL EXCEPT M58) — Continued
0459 00
ASSEMBLY
1.
Install release assembly (1) in trim vane (2). Secure with two plates (3), six screws (4), and new locknuts (5).
2.
Install upper stiffener (6) on trim vane (2). Secure with five screws (7) and new locknuts (8).
3.
Install lower stiffener (9) on trim vane (2). Secure with seven screws (10) and new locknuts (11).
4.
Install two hinges (12) on lower stiffener (9). Secure with two screws (13) and new locknuts (14).
5.
Install three bumpers (15) with six washers (16) on trim vane (2). Secure with three washers (17) and new locknuts (18).
6.
Install rear pod (19), 12 washers (20), six screws (21), and new locknuts (22) on trim vane (2).
7.
Install front pod (23), six washers (24) on plywood side, screws (25), and new locknuts (26) on trim vane (2).
8.
Install 14 washers (27), seven screws (28), and new locknuts (29) on front pod (23), trim vane (2), and rear pod (19).
FOLLOW-THROUGH STEPS
1.
Install trim vane (WP 0458 00).
END OF TASK
0459 00-3/4 blank
