TM 9-2350-277-20-4
REPLACE STEERING SUPPORT, BRACKETS, AND SHAFT — Continued
0432 00
16. Install four screws (10), washers (11), and new lockwashers (12) and secure bracket (3) with shaft (2) to bulkhead.
17. Guide shaft (2) through bracket (13). Secure bracket and ground lead (14) to bulkhead with six screws (15), new
lockwashers (16), and washers (17).
18. Install cable (1) and new grommet (2) in bracket (3). Secure cable to bracket with screw (4), clamp (5), washer (6), and
nut (7).
19. Install cable (1) in support (8) and secure with two screws (9), clamps (10), washers (11), and nuts (12).
20. Guide shaft (13) through support (8), and install support (8) on bracket (3). Secure with two screws (14), washers (15),
and new locknuts (16).
21. Install pin (17) through bracket (3) and support (8). Secure support in the upper position on the bracket.
22. Install lanyard (18) on bracket (3) and secure with screw (19), washer (20), and nut (21).
23. Install woodruff key (22) on shaft (13).
24. Align woodruff key (22) and install steering wheel assembly (23) on shaft (13).
0432 00-9
