TM 9-2350-277-20-3
REPLACE UPPER AND LOWER SERVICE BRAKE PEDAL — Continued
0409 00
7.
Remove cotter pin (10) and washer (11) from link (4) and shaft (12). Slide link as far off shaft as possible. Discard
cotter pin.
8.
Remove four screws (13), washers (14), and lockwashers (15) from two mount bearings (16). Discard lockwashers.
9.
Remove shaft with attached bearings (16) from driver’s compartment. Have helper assist to catch link (4) in power plant
front access hole. Remove grommet (17) from driver’s compartment bulkhead. Discard grommet. Remove shaft
assembly from carrier.
0409 00-4
