TM 9-2350-277-20-3
REPLACE UPPER AND LOWER SERVICE BRAKE PEDAL — Continued
0409 00
4.
Slide shaft (2) into driver’s compartment bulkhead. Install new grommet (6) on shaft. Install grommet in bulkhead.
5.
Install new key (1) on shaft (2).
6.
(H) Install link (7) and washer (8) on shaft (2).
7.
Install two mount bearings (5) on driver’s compartment floor. Secure with four screws (9), washers (10), and new
lockwashers (11).
8.
(H) Secure link (7) to shaft (2) with new cotter pin (12).
0409 00-7
