TM 9-2350-277-20-3
REPLACE TRANSMISSION OIL SAMPLING VALVE AND PRESSURE SWITCH
Continued
0400 00
INSTALLATION
1.
Install new preformed packing (8), new retainer (7), and tee (3) with tube nut (6) on transmission.
2.
Apply sealing compound to male threads of switch (5), and install switch in tee (3).
3.
Connect circuit 366 lead (4) to switch (5)
4.
Apply sealing compound to male threads of bushing (2), and install bushing in tee (3).
5.
Install valve (1) in bushing (2).
FOLLOW-THROUGH STEPS
1.
Close power plant access door (see your -10).
2.
Raise trim vane (see your -10).
END OF TASK
0400 00-3/4 blank