TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M113A3, M901A3, M981A3, M1059A3, AND
M58 )— Continued
0362 00
31. Remove four screws (3), lockwashers (4), washers (2), and harness access cover (1) from top of rear hull. Discard
lockwashers (M58 only).
NOTE
The M58 does not use connector, bushing, and hardware only adhesive sealant on wiring
harness in hull opening. To remove leads on M58, carefully cut adhesive sealant and pull
harness into carrier.
32. Loosen nut (14) that secures circuit 21 (15), 22 (16), 24 (17), and 30 (18) leads with rubber bushing (19) in
connector (20). Separate nut (14), washer (21), and rubber bushing (19) from connector.
0362 00-13
