TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M113A3, M901A3, M981A3, M1059A3, AND
M58 )— Continued
0362 00
17. Remove two screws (6), nuts (7), and clamp (8) from floor transverse beam (9).
18. Remove screw (10), nut (11), and clamp (8) from circuit 451 lead (12).
NOTE
Only the M58, M901A3, M981A3, and M1059A3 have the lockwasher (14).
19. Remove three screws (13), lockwashers (14), clamps (15), and circuit 451 lead (12) from weldnut. Discard lockwashers.
20. If personnel heater is installed, disconnect circuit 402 lead (18) from personnel heater fuel pump (19).
0362 00-8
