TM 9-2350-277-20-3
REPAIR BATTERY BOX (M577A3 AND M1068A3 ONLY) — Continued
0351 00
3.
Install channel divider (7) on battery box frame (2). Secure with two washers (8) and screws (9). TIGHTEN SCREWS
TO 96-120 LB-IN (11-14 N m) TORQUE.
FOLLOW-THROUGH STEPS
1.
Install batteries and retainers (WP 0347 00).
2.
Install battery leads (WP 0341 00).
3.
Connect battery ground lead (WP 0338 00).
4.
Install battery access cover (see your -10).
5.
Start engine (see your -10).
6.
Raise and lock ramp (see your -10).
7.
Stop engine (see your -10).
END OF TASK
0351 00-3/4 blank
