TM 9-2350-277-20-3
REPLACE TELEPOSTS AND COVER — Continued
0296 00
INSTALLATION
1.
Install four insulators (8) and posts (7) in hull.
2.
Install eight new gaskets (6), washers (5), and teleposts (4) on each end of four posts (7).
3.
Install rubber shield (3) on hull mount. Secure with retainer strip (2) and two screws (1).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0296 00-3/4 blank
