TM 9-2350-277-20-3
REPLACE INSTRUMENT PANEL GAUGES — Continued
0285 00
INSTALLATION
1.
Install gauge (2) in front of instrument panel.
NOTE
Check front of instrument panel to make sure gauge is aligned right before tightening nuts.
2.
Install bracket (5) on rear of gauge, and secure with two lockwashers (4) and nuts (3).
CAUTION
Make sure circuit leads are connected to correct gauges. See wiring diagrams at the end of this
manual.
3.
Connect circuit leads (1) to rear of gauge (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Turn MASTER SWITCH to ON (see your -10).
3.
Check fuel gauge and battery generator gauge for proper operation (see your -10).
4.
Start engine to check operation of coolant temperature gage (see your -10).
5.
Stop engine (see your -10).
END OF TASK
0285 00-2
