TM 9-2350-277-20-3
REPLACE ENGINE START SWITCH — Continued
0284 00
INSTALLATION
1.
Connect circuit 14/74 connector (5) to rear of start switch (2).
2.
Install nut (4) and lock washer (3) on start switch (2).
3.
Install start switch (2) through rear of instrument panel. Secure with two nuts (1) and (4).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Turn MASTER SWITCH to ON (see your -10).
3.
Crank engine to check for proper installation of starter switch (see your -10).
4.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
0284 00-2
