TM 9-2350-277-20-2
REPLACE COOLANT PUMP IDLER PULLEY/BELTS — Continued
0240 00
4.
Check for proper tension by using straight edge (2) to measure deflection across drive belts at pulleys (1) and (3). If
tension meter is available, check 40-50 lbs (173–217 N) tension. If necessary, readjust tension, and then torque two
screws (4) to 360-420 lb-in (41-47 N.m).
1/4"-3/8"
FOLLOW-THROUGH STEPS
1.
Install power plant rear access panels (see your -10).
END OF TASK
0240 00-3/4 blank
